VW Transporter Van - Cooling Fluid Mount
Contributor: Energy Source: Vibration
Application: Automobile
Specific Location: On chassis, near engine block, on metal part that supports cooling fluid
Data Duration: 07m 20s
Data Frequency: 2048 Hz
Abstract: The selected car is a commercial vehicle (VW Transporter van) with a 5-cylinder diesel engine. The engine speed is relatively low, varying between 1500-2500 rpm. The van was driven for around a set of roundabouts and straights for approx. 5 minutes, the maximum speed on the straight road sections was 50 mph. The data streams are included in .mat file, titled with the location of each data segments. There are 7 columns of data that represent: time (in seconds), x-axis raw data (in mV), y-axis raw data (in mV), z-axis raw data (in mV), x-axis acceleration (in g), y-axis acceleration (in g), and z-axis acceleration (in g). Features: a) Engine start up is not captured b) Data starts at 25.83 seconds, ends at 460.67 seconds c) Main vibration is in the horizontal plane, vertical direction is damped. d) Straight road section: 125 - 185 seconds
Acknowledgement: If you use this data, please:
- acknowledge 'University of Bristol/University of Southampton, "Next Generation Energy-Harvesting Electronics: Holistic Approach" [online]. Available: http://www.holistic.ecs.soton.ac.uk/',
- specify that the data was "Downloaded via The EH Network Data Repository (http://eh-network.org/data)".
Link to Further Information and Analysis: http://www.holistic.ecs.soton.ac.uk/data/van_cooling_fluid/data.php
